Get A Quote

Hot Water System

Naked Energy > Services > Solar > Hot Water System

Introducing the Enviro heat Thermal Battery for Your Home Solar System

The Enviro heat Thermal Battery is designed to seamlessly integrate with your home solar system in Perth and Western Australia, providing efficient storage of heat energy for use during non-sunny periods. Here’s why it’s the best addition to your solar setup:

An air-source heat pump from Naked Energy utilizes renewable energy from the air to provide efficient water heating, significantly cutting down on home energy costs while ensuring a steady supply of hot water around the clock, regardless of weather conditions in Perth and Western Australia.

Standard Heat Pump vs Micro-Channel

Multi Channel Design
Multi Channel Design
The multi-channel design condenser design divides flow into 11 galleries with greatly improved heat transfer over a single pipe.
Titanium-Aluminium Alloy For Better Corrosion & Heat Resistance
Titanium-Aluminium Alloy For Better Corrosion & Heat Resistance
The multi-channel condenser withstands corrosion for 7.5 times longer than copper pipe condenser.
Reduced Pressure Drop Improves Compressor Efficiency by 6%
Reduced Pressure Drop Improves Compressor Efficiency by 6%
Micro-channel: pressure drop 0.03Mpa Coil pipe: pressure drop 0.15Mpa.
Larger Contact Surface to Improve Heat Transfer Efficiency by 30%
Larger Contact Surface to Improve Heat Transfer Efficiency by 30%
Improved heat transfer means improved efficiency. Up to 71% cheaper to run than conventional hot water systems.

The Condenser Design

MICRO-CHANNEL CONDENSER

MICRO-CHANNEL CONDENSER

Larger contact surface for better heat transfer and less refrigerant consumption.
HEAT PUMP COMPRESSOR

HEAT PUMP COMPRESSOR

Specially designed for heat pumps to maximise the efficiency.
BOTTOM COIL

BOTTOM COIL

Design enlarges the total heat exchange area to deliver more hot water.
NO FIXED WIRING

NO FIXED WIRING

Simply plug the unit into a 10 Amp power point, no fixed wiring required.
DUAL ANODES

DUAL ANODES

This is Subtitle

Twice the corrosion protection with dual full length anodes. Reduces costly maintenance.

Features

Storage Capacity

Store up to 18 kW of heat energy in a single Enviro heat Tank, ensuring you have ample hot water available even when solar generation is not possible

Advanced Control System

Equipped with a sophisticated control system featuring an automatic timer, it optimizes the use of solar power during the day and manages heat storage efficiently.

Dual Timer Functionality

Includes a second timer for an early morning boost, ensuring you never run out of hot water, even during peak consumption times

Benefits

Energy Savings

By integrating the Enviro heat system from Naked Energy, you can reduce your hot water heating costs by up to 71%, depending on your solar energy usage and local energy rates.

Efficiency Rating

The Enviro heat system achieves a thermal efficiency rating of over 90%, ensuring that nearly all the stored heat is available for use, minimizing waste.

Sustainability Impact

Enhancing your solar system with the Enviro heat thermal battery reduces your carbon footprint by lowering the need for grid electricity and promoting the use of renewable solar energy.

Why Get One?

Enhanced Energy Efficiency

Utilizes solar power more effectively by storing excess heat generated during the day, reducing reliance on grid power and lowering energy costs.

Reduced Energy Bills

By maximizing the use of solar energy and reducing reliance on traditional heating methods, you can significantly cut down on your monthly energy expenses.

Increased Hot Water Availability

Provides a reliable supply of hot water throughout the day and night, catering to your household’s peak consumption needs without interruption.

The Enviroheat Thermal Battery is the perfect solution to optimize the performance of your solar system, offering both immediate and long-term benefits. Enhance your home’s energy efficiency with Naked Energy and enjoy the comfort of reliable hot water all year round in Perth and Western Australia.

Other Key Features

Heating Efficiency

Converts approximately 95% of the stored heat energy into usable hot water.

Temperature Range

Operates efficiently in ambient temperatures as low as -5°C to 35°C.

Storage Duration

Can maintain hot water temperatures for up to 48 hours without additional heating, depending on usage and ambient conditions.

System Lifespan

Typically lasts between 10 to 15 years with proper maintenance.

Installation Time

Average installation time is between 1 to 2 days, depending on system complexity and existing setup

Operating Costs

Low annual operating costs due to high energy efficiency and reduced reliance on grid electricity.

Warranty

Often comes with a warranty period of 5 to 10 years, providing coverage for parts and potential system issues.

How Heat Pumps Work:

Think of a heat pump as a refrigerator running in reverse. While a refrigerator removes heat from inside the fridge and releases it outside, a heat pump pulls heat from the outside air and moves it into your water tank. Here’s a step-by-step breakdown:

  1. Air Intake:A fan draws in outside air, which contains heat energy.
  2. Evaporator:This air passes over the evaporator, where a special liquid refrigerant inside absorbs the heat and turns into a gas.
  3. Compressor:The gas is then compressed by the compressor, which increases its temperature.
  4. Condenser:The hot gas moves through the condenser coil, where it heats the water inside your tank.
  5. Cycle Repeats:After heating the water, the refrigerant cools down and turns back into a liquid. It then returns to the evaporator to start the process again.

Heat pumps are incredibly efficient, even in cold temperatures as low as -7°C. For example, the Enviroheat system can turn 1kW of electricity into over 4kW of heat!

Here's a step-by-step breakdown:

Cold water enters the heat pump through the inlet valve located at the lower side of the tank.

The heat pump extracts heat from the surrounding air through a fan system (shown on the right). This heat intake is critical for warming the water inside the tank.

Inside the system, a refrigerant absorbs the heat from the air. This refrigerant is compressed, which increases its temperature.

The hot refrigerant passes through a coil (heat exchanger) inside the tank, which transfers the heat to the water stored in the tank. The water heats up as the refrigerant cools down and cycles back to absorb more heat.

As the water in the tank heats up, it rises and can be extracted through the hot water outlet at the top of the tank, ready to be used for household needs.

The system repeats this process, continually extracting heat from the ambient air, transferring it to the water through the refrigerant, and maintaining a steady supply of hot water.

e50d94_2749f337d3034d2bb5acce5c38fd305e~mv2

High Efficiency

Delivers up to 4 times the amount of heat energy compared to the electrical energy consumed, thanks to advanced technology from Naked Energy.

Reduces household energy costs significantly, offering long-term financial benefits and making it a cost-effective solution for Perth homes.

Legionella Proof

Incorporates features to prevent the growth of Legionella bacteria, ensuring safe and hygienic water

Meets industry standards for health and safety, providing peace of mind for users.

Frost Proof

Operates efficiently even in temperatures as low as -15°C, ensuring consistent performance in cold climates, including Western Australia.

Built to withstand freezing conditions, extending the lifespan of the unit

Anti-Freeze

Equipped with anti-freeze technology to prevent damage during freezing temperatures, maintaining operational reliability.

Enhances the durability and lifespan of the unit by protecting against frost damage.

Overheat Proof

Includes mechanisms to prevent overheating, ensuring safe operation and extending the life of the heat pump.

Maintains optimal performance by avoiding heat-related issues

By integrating these advanced features, heat pumps from Naked Energy provide a reliable, efficient, and eco-friendly solution for your water heating needs in Perth and Western Australia, offering significant savings and enhanced performance.